HomeProductsEnvironmental atmospheric monitoringAir Quality Monitoring Accessories and PM Impactors
  • I07A TSP PM10 Impactor
  • I07B TSP PM10 PM2.5 Impactor
  • J01 Passive Air Sampler for Fluorides
  • J02B Ambient Air Fluoride Sampling Inlet
  • J05 Semi-Volatile Organic Compound SVOC Sampling Inlet
  • D19B Insulated Transport Storage Container for Filter Membranes
  • I07A TSP PM10 Impactor
  • I07B TSP PM10 PM2.5 Impactor
  • J01 Passive Air Sampler for Fluorides
  • J02B Ambient Air Fluoride Sampling Inlet
  • J05 Semi-Volatile Organic Compound SVOC Sampling Inlet
  • D19B Insulated Transport Storage Container for Filter Membranes

Air Quality Monitoring Accessories and PM Impactors

I07A TSP/PM10 Impactor

I07B TSP/PM10/PM2.5 Impactor

J01 Passive Air Sampler for Fluorides

J02B Ambient Air Fluoride Sampling Inlet

J05 Semi-Volatile Organic Compound (SVOC) Sampling Inlet

D19B Insulated Transport/Storage Container for Filter Membranes

Features:
Particulate Matter (PM) Impactors & Cutters
Specific Pollutant Samplers (SVOCs & Fluoride)
Sample Storage & Transportation

Introduction

I04 TSP/PM10/PM2.5 Cutter

Reference Standards

GB/T 15432-1995 Ambient air – Determination of total suspended particulates – Gravimetric method

HJ/T 374-2007 Technical requirements and test procedures for total suspended particulates sampler

HJ/T 93-2013 Technical requirements and test procedures for PM10 sampler

HJ/T 618-2011 Ambient air – Determination of PM10 and PM2.5 – Gravimetric method

JJG 943-2011 Verification regulation of total suspended particulates samplers

At present, there are three standards for atmospheric particulate matter concentration, namely the total suspended particulates (TSP) concentration standard, the inhalable particulate matter (PM10) concentration standard, and the respirable particulate matter (PM2.5) concentration standard. Most developed countries have shifted from past monitoring of atmospheric total suspended particulates (TSP) concentration to monitoring the concentration of atmospheric inhalable particulate matter (PM10) and respirable particulate matter (PM2.5), and use this to evaluate ambient air quality.

I02 Series Cutter

The I02 series cutter consists of two parts: a PM10 cutter and a PM2.5 cutter. It is a standard accessory for ambient air quality concentration detection instruments such as low-flow (16.67L/min) air particulate samplers and automatic monitoring instruments. It can be widely used by environmental protection departments, universities, and scientific research institutes for sampling particulate matter in ambient air.

The TSP/PM10/PM2.5 series sampling head is used with mid-flow intelligent TSP samplers to capture TSP, PM10, and PM2.5 particulate matter in the air. It is widely used in environmental protection, health, labor, work safety, military, scientific research, education, and other departments.

I03 Mid-flow Semi-volatile Organic Compounds (SVOCs) Sampling Canister

Used for sampling semi-volatile organic compounds in ambient air, used in conjunction with the 3920G high negative pressure ambient air particulate sampler.

TSP/PM10 Cutter

Low flow 16.67L/min, impact type, Whatman filter membrane is recommended.

I07A TSP PM10 Impactor

Low flow 16.67L/min, impact type, Whatman filter membrane is recommended.

Sampling Device

The J01 air fluoride passive sampling device is a sampling device that uses lime filter paper to collect fluoride in ambient air. It is suitable for the determination of the long-term average pollution level of fluoride in ambient air and meets the requirements of relevant national standards. Widely used in environmental protection, health, work safety, military, scientific research, education, and other departments.

J01 Passive Air Sampler for Fluorides

The J02B ambient air fluoride sampling head is used for capturing particulate and gaseous fluorides in ambient air. It is used in conjunction with the 3920G high negative pressure ambient air particulate sampler or other mid-flow samplers, and meets the requirements of relevant national standards. Widely used in environmental protection, health, work safety, military, scientific research, education, and other departments.

J02B Ambient Air Fluoride Sampling Inlet

J05 Semi-volatile Organic Compounds Sampling Head

Used to collect SVOCs, heavy metals, etc., in ambient air, used in conjunction with the 3925 ambient air semi-volatile organic compounds sampler, and meets the requirements of relevant national standards. Suitable for routine aerosol monitoring in environmental protection, health, labor, work safety, military, scientific research, education, and other departments.

J05 Semi-Volatile Organic Compound SVOC Sampling Inlet

D19B Filter Membrane Storage and Transportation Incubator

D19B Insulated Transport Storage Container for Filter Membranes

Mainly used in conjunction with low-flow ambient air particulate samplers, it can be used for constant temperature preservation of filter membranes and provides shock absorption protection during transportation.

Insulation time: ≥24 hours (equipped with imported refrigerant)

Volume: 12L Storage and transportation quantity of 47mm filter clips: 24

Tags: